Advanced / Configuration Setup / Trajectory

This section provides some guidance in configuring the model input to perform certain specialized calculations. The default configuration supplied with the test meteorological data is confined to a simple trajectory calculation. More complex scenarios can be configured through the Advanced, Configuration Setup, Trajectory menu tab. The menu is used to modify the SETUP.CFG namelist file. This file is not required, and if not present in the root startup directory, default values are used. These parameters can all be changed without recompilation by modification of the contents of SETUP.CFG and in some cases their modification will substantially change the nature of the simulation. The configuration file should be present in the root directory. An illustration of the menu is shown below.

When using the GUI, the namelist file will be deleted and all variables are returned to their default value by selecting the "Reset" button. The following summarizes the namelist variables and their corresponding section in the GUI menu.

  1. Set fixed or automatic TIME STEPS
  2. Define subgrid and MSL/AGL UNITS
  3. MULTIPLE trajectories in time
  4. Trajectory points OUTPUT FREQUENCY
  5. MIXING DEPTH computation method
  6. Add METEOROLOGY output along trajectory
  7. Meteorological grid offset ENSEMBLE
  8. Summary of all NAMELIST variable defaults


Table of Contents